Rexco Mold Release Agents, Mold Release Wax, PVA and Buffing Compounds for Fiberglass FRP GRC GRP Composites

Rexco Mold Care Products is the leading North American manufacturer of Polyvinyl alcohol (PVA) parting films (film-forming barrier solutions) for thermoset composites. PVA parting films are solvent resistant yet water soluble and include traditional alcohol containing solution for fast drying and environmentally friendly, non-flammable PVA parting films.

Rexco Mold Care Products manufactures PARTALL^®, MARBALEASE^®, and FORMULA FIVE^® brand mold release agents, paste wax mold releases, polyvinyl alcohol (PVA) coatings (parting film), fiberglass buffing compound, polymeric and semi-permanent mold releases, Internal Mold Release (IMR), mold sealers and cleaners.

Rexco is a reliable partner to thermoset composites manufacturers supplying simple, effective and economical mold release agents for over fifty years. Makers of the original Green Wax - PARTALL^® Paste #2 the general purpose silicone-free mold release wax, Rexco also offers a non-silicone high temperature paste mold release wax with PTFE, PARTALL^® Hi-Temp Mold Release Wax; and low-VOC, non-hazardous PVA film-forming barrier solution PARTALL^® Coverall Film. These products are used in FRP, GRP, aerospace, automotive, bath ware, cast polymer, fiberglass, infrastructure, marine, grates, pipes/tanks, polymer concrete (polycrete/GRC), recreational products, sanitary and transportation sectors.

- FORMULA FIVE^® Clean 'N Glaze buffing compound for cleaning, glazing and routine maintenance of fiberglass molds, final polish of gel coat and to restore shine to oxidized gelcoat surfaces (Click here for details).

- FORMULA FIVE^® Mold Cleaners and FORMULA FIVE^® Wax Strippers: are effective mold cleaners for routine mold maintenance and for transitioning molds from traditional mold release systems to polymeric and semi-permanent mold release agent systems.

Rexco Mold Care Products are available through better distributors in over forty countries. No matter how large or small the fiberglass or composites mold or part you are fabricating, Rexco mold release agents can help prevent mold hang-ups and assist in producing a flawless finish. For PARTALL^®, MARBALEASE^®, and FORMULA FIVE^® mold release samples, additional product information, or the name of a domestic or international distributor please contact us. Thank you for visiting our home on the web. Rexco welcomes the opportunity to serve your mold release needs.

.... .....